← Back to blog

November 10, 2026

Anthracnose in coffee: management guide with biostimulants

Anthracnose in coffee: management guide with biostimulants
✔ Quick answer

Anthracnose in coffee is a disease caused by fungi of the genus Colletotrichum that can affect leaves, branches and fruits. Its management relies on coffee plantation hygiene, regulated shade, balanced nutrition and technical advice; biostimulants are a nutritional support, not a plant protection product.

Introduction

Anthracnose in coffee is one of the fungal diseases that most concerns coffee growers, because it can affect leaves, branches and fruits and, with that, production and grain quality. It is associated with fungi of the genus Colletotrichum, which take advantage of periods of prolonged humidity and weakened plants to colonise tissues. Understanding how anthracnose in coffee behaves is the first step towards deciding which management practices make sense on each plantation.

This guide does not promise quick solutions nor does it present biostimulants as a remedy. It explains, from a general agronomic approach, what the disease is, which conditions favour it, which cultural and nutritional practices help to maintain a vigorous coffee plantation and at what point biostimulants can fit in as support for nutrition and stress tolerance. Any decision on plant protection products is the responsibility of the technician in charge of the plantation and must comply with the regulations of each country and the producer's certification scheme.

It is worth starting from a simple idea: a coffee plantation that receives balanced nutrition, well-regulated shade and orderly management tends to be in better condition to face difficult periods. Biostimulants can contribute to that objective, but their results depend on the crop, the soil, the water and the management, and they do not replace any of the other practices. Throughout the article it is explained how to integrate them with judgement and how to check, on the plantation itself, whether they really contribute anything.

What is anthracnose in coffee?

Key biostimulants for anthracnose control

Anthracnose in coffee is a disease caused by different species of fungi of the genus Colletotrichum. The most common symptoms are dark, sunken lesions on the leaves, spots on stems and young branches, and alterations in the fruits, which may end up drying out or falling prematurely. The intensity varies greatly depending on the area, the variety, the altitude and the humidity, so there is no single description that applies to all plantations. That is why it is so important to walk the coffee plantation regularly and record what is observed.

A common mistake is to attribute any spot or leaf drop to anthracnose in coffee. Other causes, such as nutritional deficiencies, sunburn, mechanical damage, excess water at the root or even other diseases, can produce similar symptoms. When in doubt, the prudent course is to take samples to a laboratory or consult a technician who can confirm the diagnosis before making decisions that cost money and time.

Disease cycle and predisposing conditions

Fungi of this type usually survive in pruning debris, fallen leaves and fruits that remain on the plant or on the ground. When there is free water on the plant surface, the spores can be dispersed by rain splash, wind and tools, and germinate on leaves, branches or fruits. Entry can occur through the intact surface or through wounds, and from there the fungus colonises the tissue and new lesions appear.

Among the factors that usually favour the disease are high and persistent humidity, lack of aeration within the canopy, excessive shade, wounds caused by pruning or by field operations, water stress and nutritional imbalances, especially when elements involved in tissue strength, such as calcium, boron or potassium, are lacking. None of these factors acts alone: the usual situation is that they add up, and that is why management works better when several are addressed at once.

Warning signs for monitoring

Good monitoring does not consist of looking once a year, but of always walking the same points of the plot and noting what is seen. It is worth paying attention to the presence of spots on young and old leaves, abnormal leaf drop, branches with drying tips and fruits with sunken or dark areas. It is also useful to compare areas with more shade and with less, low and high areas, and the edges and centres of the plot, because the differences within the same plot say a great deal about the conditions that favour the problem.

Physiological and productive impact

When the disease progresses, leaf loss reduces the photosynthetic surface and, with it, the reserves the plant needs to sustain the current harvest and prepare the next one. The affectation of the fruits can translate into lower yield and into beans of poorer appearance or quality, with the corresponding economic effect. The severity depends on the variety, the age of the plantation and the climate of each season, and that is why generalisations should be avoided.

In organic production systems, where the range of authorised tools is narrower, the weight of basic agronomic management is even greater: hygiene, shade regulation, balanced nutrition and constant observation. This does not mean that there is a product capable of solving the problem on its own, but rather that it is the sum of good practices that builds the stability of the crop.

What role can biostimulation play

Biostimulants are products applied to the plant or to the root zone with the aim of favouring physiological processes related to nutrition, growth and tolerance to abiotic stress, such as drought, excess salts, cold or heat. They are not fertilisers in the strict sense, nor are they plant protection products, and it is important not to confuse them: their function is to accompany the plant, not to act on a specific organism.

In the context of anthracnose in coffee, the underlying idea is simple. A well-nourished plant with an active root system and without prolonged stress tends to hold its tissues together better and recover more easily from damage. Biostimulants can contribute to that situation, for example by improving the efficiency with which the plant uses the available nutrients, but their effects on the disease itself should not be assumed. Any claim in that sense should be backed by the product's technical documentation and by well-designed trials on the plantation itself.

Nutrition and vigour

The elements most closely related to the firmness of coffee plant tissues are calcium, boron and potassium, together with an adequate level of nitrogen. An excess of nitrogen tends to produce very tender shoots, whereas a deficiency of calcium or boron can lead to less firm tissues and to deformations in young leaves. Amino acids, seaweed extracts and some chelated micronutrients are used to support the uptake and use of these nutrients, always within a fertilisation plan based on soil and leaf analysis.

Root and soil

An active root system is the basis of water and nutrient uptake. Humic and fulvic substances, seaweed extracts and certain beneficial microorganisms are used on many plantations to favour root development and soil biological activity. Organic matter, soil cover and adequate drainage remain the foundation: no biostimulant compensates for compacted, waterlogged or depleted soil.

Limits worth keeping in mind

The results of biostimulants are not uniform. They vary with the product, the formulation, the timing of application, the crop, the soil, the water and general management. That is why the information in the technical data sheet and the technician's local experience carry more weight than any generic promise. A serious product will not promise guaranteed health or yield results, and whoever sells it should be able to explain clearly what it can and cannot contribute.

Types of biostimulants used in coffee

There are several families of biostimulants used in coffee nutrition programmes. Their choice depends on the crop stage, the state of the soil and the producer's objectives, and a technician should always be consulted. These are the most common:

  • Seaweed extracts, including microalgae: described as a source of bioactive organic compounds, such as polysaccharides and substances with activity similar to that of growth regulators. They are usually used to support rooting, sprouting and tolerance to abiotic stress.
  • Humic and fulvic acids: associated with improved soil structure, water retention and micronutrient availability.
  • Amino acids and peptides: used to facilitate nutrient uptake and to accompany the plant at times of high demand or stress.
  • Plant extracts: provide organic compounds of plant origin; their composition and method of use vary greatly from one product to another.
  • Chelated micronutrients: calcium, boron, zinc and other elements, when analysis indicates they are needed.

Combining products with different modes of action can make sense, but only when there is a clear agronomic reason. Mixing out of habit increases cost and the risk of incompatibilities, and makes it harder to know which product has contributed what.

Microalgae extracts: how they are usually used

Microalgae extracts are commonly applied as a foliar spray or with the irrigation water, at times of high plant demand, such as sprouting, flowering or fruit filling. Their composition varies according to the species, the source cultivation system and the extraction process, so they should not be treated as interchangeable products. The technical data sheet is the document that states the composition, method of use, dose and precautions for each product.

Fulvic acids and soil health

Fulvic acids are usually applied to the soil or with the irrigation water. They are used to support nutrient availability and root development, and they integrate best in soils with organic matter and biological activity. In coffee they can complement base fertilisation and foliar applications, provided that soil analysis and crop observation justify their use.

Application strategy and integrated management

A programme with biostimulants works best when it forms part of integrated management that includes cultural practices, monitoring and technical advice. The strategy must be adapted to the phenology of the coffee plant, the climate of each area and the soil conditions, and reviewed each season with the records to hand.

Timing of application and dosage

The timing of application depends on the stage of the crop: after pruning, at bud break, during flowering and fruit set and during fruit filling are moments when nutrient demand tends to be high. The doses, frequency and water volume are not fixed in a general article: they are those indicated in the product's technical data sheet or those recommended by the technician, who knows the area and the state of the crop. Applying more than indicated does not improve results and may cause phytotoxicity or unnecessary expense.

As a practical rule, it is advisable to apply during the hours of lowest radiation, with good leaf coverage if the route is foliar, and to avoid applications just before heavy rain. It is useful to record the date, product, dose and conditions of each application so that the results can be interpreted afterwards.

Complementary cultural practices

Sanitary pruning allows affected branches and fruits to be removed, and the debris should be taken out of the plot or managed in such a way that no foci remain near the plants. Regulating shade improves aeration and reduces the periods when leaves remain wet. Avoiding excess nitrogen and ensuring a balanced supply of potassium, calcium and boron helps make the tissues firmer. Cover crops and the incorporation of organic matter improve the structure and biological activity of the soil. Cleaning tools between plants or lots, especially if work has been done in areas with symptoms, is a simple and inexpensive measure.

Integration with other tools and technical advice

In coffee plantation management there are other products and practices, including beneficial microorganisms and authorised plant protection products. Their use is the responsibility of the technician, who must assess the diagnosis, the regulations in force in the country or the producer's certification, the safety intervals and compatibility with the rest of the programme. Before mixing products in the tank, a small-scale compatibility test should be carried out.

How to evaluate a biostimulation programme on your plantation

Rather than relying on other people's experiences, the most reliable approach is to check on your own plantation whether a programme contributes anything. Designing a simple trial and recording it in an orderly way allows decisions to be made with your own data and avoids drawing conclusions from isolated impressions. A reasonable checklist would be this:

  • Choose comparable plots: same variety, age, altitude, shade and previous management.
  • Keep a control plot that receives exactly the same management, except for the biostimulant being evaluated.
  • Repeat the trial in several areas of the same plot, if possible, so as not to confuse the effect of the product with differences in the terrain.
  • Record dates, products, doses, weather conditions and any other intervention.
  • Note down, using the same pattern and at the same points, vigour, leaf colour, sprouting, fruit set, fruit drop and the observed health status.
  • Evaluate the final result, that is, the harvest and grain quality, and compare it with the control plot.
  • Repeat the trial in another season before generalising, because the weather changes from one season to another.

It is important to interpret with caution. A difference between plots may be due to the terrain, irrigation or weather and not to the product. If the difference is small or irregular, the reasonable thing is not to attribute it to the biostimulant without further tests.

Mistakes worth avoiding

The most common mistakes when evaluating a programme are comparing very different plots, changing several things at once, not recording anything, judging only by visual appearance, evaluating too early and forgetting the effect of the weather. All of them lead to conclusions that do not hold up. An orderly record, even a simple one, is worth more than many opinions.

How to use the information obtained

With the records in hand, the agronomist can decide whether the programme deserves to continue, be adjusted or be abandoned. Making a decision like this is preferable to following generic recommendations or copying what the neighbouring plantation does. If the diagnosis of coffee anthracnose is confirmed, the nutrition programme must coexist with the sanitary measures that the agronomist considers appropriate, and biostimulants are understood as a support, not as the main measure.

Do you need professional help?

At Ecoganic in Spain, Europe, we offer Biostimulants, Organic fertilisers. Contact our team through the website.

Request your free quote

Frequently asked questions about anthracnose in coffee and biostimulants

Do biostimulants replace the sanitary management of anthracnose in coffee?

No. Biostimulants are not plant protection products and are not intended to act on a specific organism, but rather to support the plant's nutrition and stress tolerance. The sanitary management of anthracnose in coffee is the responsibility of the technician in charge and combines hygiene, pruning, shade regulation and, where appropriate, the products authorised in each country and certification system. Biostimulants can be a complement within that set, never a substitute.

Which biostimulant is the most suitable for the coffee plantation?

There is no single product that is the best for all plantations. The choice depends on the crop stage, the state of the soil, the results of soil and leaf analysis and what the grower wants to improve, such as rooting, sprouting or stress tolerance. The most sensible approach is to consult the technical data sheet, seek advice and check the result with a simple trial on the plantation itself.

How should biostimulants be applied to make the most of them?

For foliar application, it is advisable to work during the hours of lowest radiation, early in the morning or late in the afternoon, to reduce the risk of scorching and losses through evaporation. It is also important to achieve good leaf coverage, including the underside of the leaves when the data sheet recommends it. The dose, water volume and frequency are those indicated in the product's technical data sheet or by the technician, and they should not be increased on one's own initiative.

Can biostimulants be mixed with other products in the tank?

In many cases it is possible, but it cannot be taken for granted. Physical compatibility must be checked, that is, that the mixture is homogeneous and does not form precipitates, as well as chemical compatibility, so that no component loses its function. Before preparing a large volume, it is advisable to carry out a small-scale test and, in organic production, to use only products admitted under the grower's certification system.

When should a nutrition and biostimulation programme in coffee be started?

It is usually useful to plan it before the stages of greatest plant demand, such as sprouting, flowering and fruit filling, and not when symptoms of advanced stress are already present. It may also make sense to apply after pruning or after a stress episode, such as a prolonged drought or hail, to support recovery. The specific schedule should be set by the technician according to the area, the variety and the conditions of each season.

What role does the soil play in the general condition of the coffee plantation?

A soil with good structure, organic matter and biological activity favours the uptake of water and nutrients and reduces plant stress. Conversely, compacted or waterlogged soil limits root development and weakens the coffee tree, whatever the product programme. That is why biostimulation must be combined with soil improvement practices, such as the addition of organic matter and the use of cover crops.

How can I tell whether a biostimulation programme is working on my plantation?

The most reliable way is to compare with a control plot that receives the same management, except for the product being evaluated. Dates, doses, weather and observations of vigour, sprouting, fruit drop and harvest must be recorded using the same schedule in both plots. It is advisable to repeat the trial in another season before drawing conclusions, because the weather and the terrain can explain differences that are not due to the product.

Where can I get more information?

At Ecoganic we work with organic biostimulants and fertilisers and we can guide you in choosing products for your crop. You can consult our organic agricultural biostimulants and request personalised advice from our team. You can also visit the trials and field results section of our website to see how we present technical information.

WhatsAppEmail